? semiconductor components industries, llc, 2008 june, 2008 ? rev. 3 1 publication order number: byw80/d byw80-200 switchmode power rectifiers this state ? of ? the ? art device is designed for use in switching power supplies, inverters and as free wheeling diodes. features ? ultrafast 35 nanosecond recovery time ? 175 c operating junction temperature ? popular to ? 220 package ? epoxy meets ul 94 v ? 0 @ 0.125 in ? low forward voltage ? low leakage current ? high temperature glass passivated junction ? pb ? free package is available* mechanical characteristics ? case: epoxy, molded ? weight: 1.9 grams (approximately) ? finish: all external surfaces corrosion resistant and terminal leads are readily solderable ? lead temperature for soldering purposes: 260 c max. for 10 seconds maximum ratings rating symbol values unit peak repetitive reverse voltage working peak reverse voltage dc blocking voltage v rrm v rwm v r 200 v average rectified forward current total device, (rated v r ), t c = 150 c i f(av) 8.0 a peak repetitive forward current (rated v r , square wave, 20 khz), t c = 150 c i fm 16 a nonrepetitive peak surge current (surge applied at rated load conditions halfwave, single phase, 60 hz) i fsm 100 a operating junction temperature and storage temperature range t j , t stg ? 65 to +175 c stresses exceeding maximum ratings may damage the device. maximum ratings are stress ratings only. functional operation above the recommended operating conditions is not implied. extended exposure to stresses above the recommended operating conditions may affect device reliability. *for additional information on our pb ? free strategy and soldering details, please download the on semiconductor soldering and mounting techniques reference manual, solderrm/d. device package shipping ordering information byw80 ? 200 case 221b to ? 220b plastic 3 4 1 ultrafast rectifiers 8.0 amperes, 200 volts marking diagram a = assembly location y = year ww = work week byw80 ? 200 = device code g = pb ? free package ka = diode polarity 1 3 4 to ? 220 50 units/rail http://onsemi.com ay wwg byw80-200 ka byw80 ? 200g to ? 220 (pb ? free) 50 units/rail
byw80 ? 200 http://onsemi.com 2 thermal characteristics rating symbol values unit maximum thermal resistance, junction ? to ? case r jc 3.0 c/w electrical characteristics maximum instantaneous forward voltage (note 1) (i f = 7.0 amps, t c = 100 c) (i f = 22 amps, t c = 25 c) v f 0.85 1.25 v maximum instantaneous reverse current (note 1) (rated dc voltage, t j = 100 c) (rated dc voltage, t j = 25 c) i r 1 0.01 ma maximum reverse recovery time (i f = 1.0 amp, di/dt = 50 amps/ s) (i f = 0.5 amp, i r = 1.0 amp, i rec = 0.25 amp) t rr 35 25 ns 1. pulse test: pulse width 300 s, duty cycle 2.0%. figure 1. typical forward voltage v f, instantaneous voltage (volts) 0.2 0.5 0.3 0.7 30 0.1 0.3 0.2 2.0 1.0 100 20 7.0 3.0 0.5 5.0 50 , instantaneous forward current (amps) f 1.2 v r , reverse voltage (volts) 060 40 100 120 1000 0.1 0.01 10 100 t j = 175 c i r 20 80 200 figure 2. typical reverse current* t c , case temperature ( c) 140 150 0 2.0 1.0 3.0 5.0 4.0 i 180 figure 3. current derating, case 0.4 0.7 10 70 0.9 1.1 100 c t j = 175 c 25 c 160 180 140 1.0 , reverse current ( a) 100 c 25 c 170 160 * the curves shown are typical for the highest voltage device in the grouping. typical reverse current for lower voltage selections can be estimated from these same curves if v r is sufficiently below rated v r . i , average forward current (amps) f(av) rated v r applied dc square wave 0.6 0.8 1.0 7.0 6.0 8.0 10 9.0
byw80 ? 200 http://onsemi.com 3 t a , ambient temperature ( c) 0 12 2.0 6.0 4.0 14 i f(av) 0 20 40 60 80 200 figure 4. current derating, ambient 0 1.0 6.0 10 0 1.0 2.0 i f(av) , average forward current (amps) figure 5. power dissipation p , average forward current (amps) t j = 175 c 3.0 4.0 10 5.0 2.0 square wave 100 120 140 160 180 8.0 10 dc , average power dissipation (watts) f(av) 5.0 6.0 7.0 8.0 9.0 3.0 4.0 9.0 8.0 7.0 square wave dc square wave dc r ja = 16 c/w r ja = 60 c/w (no heat sink) 0.01 0.02 0.05 0.1 0.2 0.5 1.0 0.01 0.02 0.05 0.1 0.2 0.5 1.0 2.0 5.0 10 20 50 100 200 500 1000 t, time (ms) figure 6. thermal response d = 0.5 0.05 single pulse p (pk) t 1 t 2 duty cycle, d = t 1 /t 2 z jc(t) = r(t) r jc d curves apply for power pulse train shown read time at t 1 t j(pk) - t c = p (pk) z jc(t) r(t), transient thermal resistance (normalized) 1000 10 30 10 100 v r , reverse voltage (volts) figure 7. typical capacitance c, capacitance (pf) 0.1 0.01 100 300 1.0 t j = 25 c r jc = 1.5 c/w max
byw80 ? 200 http://onsemi.com 4 package dimensions to ? 220 case 221b ? 04 issue e b r j d g l h q t u a k c s 4 13 dim min max min max millimeters inches a 0.595 0.620 15.11 15.75 b 0.380 0.405 9.65 10.29 c 0.160 0.190 4.06 4.82 d 0.025 0.035 0.64 0.89 f 0.142 0.161 3.61 4.09 g 0.190 0.210 4.83 5.33 h 0.110 0.130 2.79 3.30 j 0.014 0.025 0.36 0.64 k 0.500 0.562 12.70 14.27 l 0.045 0.060 1.14 1.52 q 0.100 0.120 2.54 3.04 r 0.080 0.110 2.04 2.79 s 0.045 0.055 1.14 1.39 t 0.235 0.255 5.97 6.48 u 0.000 0.050 0.000 1.27 notes: 1. dimensioning and tolerancing per ansi y14.5m, 1982. 2. controlling dimension: inch. f on semiconductor and are registered trademarks of semiconductor components industries, llc (scillc). scillc reserves the right to mak e changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for an y particular purpose, nor does scillc assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including wi thout limitation special, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/or specifications can and do vary in different application s and actual performance may vary over time. all operating parameters, including ?typicals? must be validated for each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the scillc product could create a sit uation where personal injury or death may occur. should buyer purchase or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its of ficers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding the design or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws and is not for resale in any manner. byw80/d publication ordering information n. american technical support : 800 ? 282 ? 9855 toll free usa/canada europe, middle east and africa technical support: phone: 421 33 790 2910 japan customer focus center phone: 81 ? 3 ? 5773 ? 3850 literature fulfillment : literature distribution center for on semiconductor p.o. box 5163, denver, colorado 80217 usa phone : 303 ? 675 ? 2175 or 800 ? 344 ? 3860 toll free usa/canada fax : 303 ? 675 ? 2176 or 800 ? 344 ? 3867 toll free usa/canada email : orderlit@onsemi.com on semiconductor website : www.onsemi.com order literature : http://www.onsemi.com/orderlit for additional information, please contact your local sales representative
|
